Hydraulic Breaker Chisel Sb35 Sb50 Sb81n

• Customization: Available
• Condition: New
• Material: Alloy Steel
• Model NO.: SB35 SB50 SB81N
• Manufacturing Process: Sawing, Heat Treatment, Shot Blasting, Paint
• Transport Package: Wooden Cases/Pallet, Customized
• Origin: Maanshan Anhui Province
• HS Code: 8431499900

Product Description

Product Description

Product Description

Hydraulic Breaker Chisel Sb35 Sb50 Sb81n

1. Material: 40 CrMoA Or 42 CrMoA.
2. CNC machine to make it more accuracy.
3. Full controlled Capacity for whole process of heat treatment.
4. Special process to ensure the hardness of the whole chisel, uniform size. (quenching,tempering).
5. Generally paint spraying two or three layers, instead of just ignoring this process directly or just spraying one layer.

*Our serial products for your reference

The chisel is wearing part of a hydraulic hammer breaker. The tip of chisel would be worn during the working process, it is mainly used in ore, roadbed, concrete, ship, slag, etc working site. It is necessary to pay attention to the daily maintenance, such as the inner and outer bushes replacement and grease supplement. Otherwise, the chisel would be broken. So the correct selection and use of chisel is the key to hydraulic hammer breaker loss reduction.

Selection Guide of chisel
1. Flat / Wedge chisel: suitable for soft and neutral layer rocks excavation, concrete breaking, and excavation of ditches.
2. Moil point chisel: suitable for hard stone, extra hard rock, and reinforced concrete excavation and broken.
3. Conical chisel: mainly used in breaking tough rocks, such as granite, and quartzite in quarry, also used for breaking heavy and thickened concrete.
4. Blunt chisel: mainly used in breaking medium-hard rocks or small cracked stones to make them smaller
 

BRAND	MODEL
SOOSAN	SB10,SB35,SB45,SB50,SB81N,SB100,SB121,SB130,SB151,SB163,SB180...
FURUKAWA	F5,F6,F12,F19,F22,F27,F35/35G,HB20G,HB30G,HB10G,HB8G,HB40G,HB5G...
ATLAS COPCO	MB1500,MB1700,HB3000,HB2200,HB4200,HB3600,HB4100,HB2500,HB5800,HB7000...
NPK	NPK4X,NPK6X,NPK7X,NPK10X,NPK12X,NPKH16X/16XE...
MONTABERT	BRV32,BRV180...
TOKU	TNB-2E/3M,TNB-4E/5M,TNB-5E/6E,TNB-7E/8E/10E,TNB-14E/16E,TNB150/151...
TOYO	THBB1600,THBB1401,THBB1400,THBB801,THBB127...
HANWOO	RHB323/323V,RHB305,RHB321,RHB313,RHB330,RHB340,RHB350,RHB322,RHB326,RHB80,RHB190,
KWANGLIM	SG2100,SG1800...
KRUPP	HM960,HM2000-2,HM2500...
RAMMER	S29,S27,S25...
BEILITE	BLT165,BLT175,BLT185,BLT195,BLT205,BLT210,BLT215,BLT220
GENERAL BREAKER	GB8AT,GB8T,GB2T,GB4T,GB8F,GB5T,GB320E,GB3T,GB11T,GB6T, GB80,GB195,GBS195
GINGTIAN	GT30,GT40,GT40B

 

 

 

 

Company Introduction

Maanshan Break All Heavy Industry Machinery Co., Ltd. Since its establishment in 2000, it has been standing in the forefront of the industry, and is located in the beautiful scenery and convenient transportation of Maanshan City, Bowang District, Xinshi industrial concentration area.  The company deeply cultivates the field of hydraulic crushing hammer, specializing in the research and development, production and sales of key consumable accessories such as hydraulic crushing hammer drill rod, crushing hammer machine and its inner and outer sleeves, pistons.  With continuous technology introduction and innovation, our products not only enjoy a high reputation in the domestic market, but also exported overseas, and won widespread praise and trust from customers around the world.

The company focuses on the development and manufacturing of hydraulic crushing hammer rod, crushing hammer machine and its inner and outer sleeves, pistons and other related consumable accessories.  We continue to introduce advanced technology, products are sold at home and abroad, widely praised.

 

Production Process

 

   Sawing off the purchased raw round steel according to the specified size requirement.

   The finished workpiece is processed by lathe, milling machine and planer.

   The workpiece is heated to a temperature above the critical temperature Ac1(hypereutectoid steel), and the temperature is held for a period of time, at which time the small amount of saponification liquid carried on the surface of the workpiece will all evaporate to produce quenching exhaust gas (measured by non-methane total hydrocarbons), and then the workpiece is cooled in water to make it fully or partially austenitic.
   The quenched workpiece is reheated to the appropriate temperature below the lower critical temperature Ac1(the beginning temperature of the transition of pearlite to austenite when heated), and then cooled to room temperature naturally after holding for a period of time.

   The cooled workpiece enters the shot blasting machine for surface treatment. After the treatment is completed, the workpiece enters the spray painting room for surface coating and dries in the spray painting room.

After spraying and drying, the product is packaged and sold.

 

Detailed Photos

 

What Other We Sell

At the same time, we provide the crushing hammer machine and its inner and outer bushings, pistons, cylinders, bolts, oil seal,spanner,hydraulic rock breaker hammer,flat pins and various accessories.

FAQ

Q1. Are you Manufacture?
Yes,our factory was established in 2000 and we have our own trading company.We are original parts supplier for many famous brand.

Q2. What kind of payments you accept?
Now we accept T/T, L/C or Western Union, other terms also could be negotiated.

Q3. Are you able to manufacturing products according to customer's design?
Sure, we have made many special orders from oversea for 10 years. We accept OEM,ODM and have our own brand.

Q4. Are you sure that your product will fit my hydraulic breaker?
We have most chisels drawing in market.Show your model and i can find for you.

Q5. How about the packing of the goods?
Standard export package, Individually packed then into wood cases or pallet, or as customers' demands.

Q6.How many days for the delivery time ?
It is about 10-15 working days after the order confirmation.Peak season 30 days.